The 117 offers a compact designed packed with a CAT III 600V rating. This True-rms meter includes an easy-to-use interface and measurements for resistance, continuity, frequency, capacitance, and Min/Max/Average all with the quick turn of the dial.
Fluke Digital Multimeters (DMMs) are on more tool belts, finding more problems, than any other test tools. Each industrial meter is tested to the extreme: drop, shock, humidity, you name it. Every Fluke Digital Multimeter gives you what you need: accurate measurements; consistent, reliable performance; attention to safety; and the strongest warranty available.
Even though they come with lots of modes and options, these products are incredibly easy to operate with. They have intuitive controls and allow even the most inexperienced individuals to easily figure out how they work. In other words, Fluke multimeters can be used by both professionals and electronics hobbyists.
The 323 clamp meter, on the other hand, is also a True RMS device and a suitable tool for residential and commercial electricians. It is more than capable of assisting the user with most of the general purpose tasks and is ideally suited for the current measurements of up to 400A in enclosed areas. Just like the other tool in this kit, the clamp meter is also very well-built and feels sturdy and durable in hands.
Portable, rugged, and accurate, the Fluke 115 is a fantastic general purpose gadget. It is more than suitable for use in the home, on the terrain, and in the light industry, and is an excellent choice for both the beginner electricians and experienced technicians (as a secondary meter). We recommend it!
While all of these Fluke multimeters will provide you with the basic measurements you need for testing electrical circuits, some will have the ability to do particular measurements that are field-specific.
The intuitive interface shows all parameters in one view. All measurement data is stored automatically, and the included PC software RaySafe View provides easy data transfer for further analysis and data storage.
Large displayIntuitive user interface with easy to view parameters in bright daylight and dark environments. All parameters in one display for overview and easily accessible settings.
Most survey meters do not handle all photon energies equally but underestimate the rate at some energies, while others may be overestimated. The RaySafe 452 provides a flat wide energy response as well as high sensitivity.
At an examination, a portion of the X-rays that hit the patient and the table are scattered and travel in all directions in the room. Survey meter measurements of scattered radiation are important for controlling the work environment for personnel who work close to the X-ray machine.
The survey meter is scanned across the walls of interest while the X-ray machine is operating. Measurements are normally performed with a worst-case scenario of the settings on the X-ray machine (high kVp and/or high mAs). Typical points of interest for wall leakage measurements include the upper part of the wall, corners, windows, doors, etcetera. The survey meter is often hand-held but may also be mounted on a tripod for longer measurements. Low dose rates normally mean longer integration times of the survey meter.
From the survey meter measurements, calculations are made to check if critical radiation limits are exceeded. To perform the calculations correctly, it is vital to know if the location is a controlled or public access area. Furthermore, parameters such as workload, occupancy, leakage, and target dose need to be considered.
Patients undergoing nuclear medicine treatments can be a source of radiation exposure for staff, family and the public. Survey meters are used to monitor the radiation from the radioactive drugs in the body. The measurement results decide if the patient needs to be quarantined or if it is safe for staff and family to be near the person. Patients may be monitored for several days after a treatment, and the data needs to be logged.
The survey meter is typically used to scan surfaces, as well as the gloves and hands of the radiopharmacist for spills. The survey meter is swept across the surface of interest to detect and measure the contamination. It is important to be close to the surface and to move the meter slowly, since the amount of spilled source can be very small and hard to detect.
No. The RaySafe 452 measures the mean photon energy of the complete spectrum, including scattered radiation, and is not able to quantify the energy of specific spectral peaks. The mean energy parameter is meant to be used more as a rough estimate for radiation protection purposes.
A. To see the full list simply head to fluke.com/en-au/where-to-buy or ask the store you are considering purchasing from. Some smaller brands and wholesalers may also fall under our listed distributors.
A. We would prefer that you do not use a PO box address for your delivery address as it can cause issues in providing our customers with a proof of delivery. If you have no alternative delivery address, please submit your redemption as normal with the PO box address and contact us at email@example.com to arrange your delivery.
A. No. Unfortunately, the promotion start and end dates are absolute, and any purchases made outside of this period are considered ineligible. Fluke Australia holds multiple promotions throughout the year, so please check if your purchase may fall under one of our other promotions. You can see all our current promotions at fluke.com/en-au/where-to-buy/promotions-and-contests.
Wires in tight compact spaces. Panels out of reach. Extra large conductors. We understand your workspace and have designed products for noise-free, reliable readings. Built on success, clamp meters designed by Fluke are known as workhorse clamp meters. With advanced performance, the clamp meter line is designed to be simple to use and gimmick-free.
Fluke also offers specialty clamp meters including leakage current clamps, 4-20ma process loop current clamps, earth ground testers and power quality clamp meters with harmonic analysis and data logging.
As a longtime authorized Fluke dealer, Kingsway Instruments is the go-to supplier for Canadian industry and trade pros. Our fanatical commitment to service is as legendary as Fluke's reputation for quality. Since 1969 we have continuously set the standard for speed, quick service turnarounds and low prices on Fluke multimeters and other electrical test products.
A wide variety of multimeters are available, designed for both basic and advanced circuit testing and geared toward different projects or specialties. While a DIYer can usually get by with a no-frills tool, electricians and HVAC pros will benefit from some of the advanced options found on professional models.
Most multimeters include a set of standard red and black probes for performing basic tests, and others come with additional alligator clips for attaching the probes to wires or battery terminals. A magnetic case or sling is a handy accessory that allows the user to attach the multimeters to something metal, such as a cabinet or the undercarriage of a car, letting you see the readout and still have both hands free for testing. These clips, probes, and cases are also available at hardware and home improvement stores.
First, we set up a little testing station with some outlets, wires, appliances, and a battery or two. We checked each of the basic functions like AC and DC voltage, resistance, continuity, and the jaws on the clamp meters. We worked in the dark as well as the bright sunlight so we could see how well the displays worked.
That was a lot to digest about the best multimeters, and there might still be some questions lingering. To help, we collected some of the most frequently asked questions about these tools and answered them below. Be sure to check for an answer to your question.
Fluke Calibration Priority Gold Instrument CarePlans are available for most calibration products. Please contact your local Fluke Calibration sales representative for details or to request a quote. You may also call the Customer Care Center at 877-355-3225 or send email to firstname.lastname@example.org.
Fluke Calibration Silver CarePlans are available for most calibration products. Please contact your local Fluke Calibration sales representative for details or to request a quote. You may also call the Customer Care Center at 877-355-3225 or send email to email@example.com.
Manage fiber test results with LinkWare Cable Test Management Software.Fluke Networks' powerful LinkWare software helps you quickly organize, edit, view, print, save, or archive test results by job site, customer, campus building, and more. You can merge test results into an existing database and then sort, search, and organize by any number of data fields or parameters.LinkWare is available free from our web site. As a contractor, once your work is done, you can give this powerful application to your customer so they can have instant access to the data electronically or you can export the data as an Adobe Portable Document Format (PDF).Extensive data management capabilities with LinkWare:
LinkWare prints professional, graphical reports with color graphs depicting the measured test parameters. You can choose which parameters to print and the order in which graphs appear. Reports can also be customized with your company logo.LinkWare Stats provides a graphical analysis of your entire cable plantLinkWare now supports LinkWare Stats, an automated statistical report option that allows you to move above and beyond the page-per-link report and see your entire cabling infrastructure. It analyzes and transforms LinkWare cable test data into graphics that reveal your cabling plant performance-summarizing your entire cabling infrastructure in a compact, graphical format that makes it easy to verify margins and spot anomalies.See what LinkWare Stats can do with your data - a free demo version of LinkWare Stats is included with every copy of LinkWare. 59ce067264